Product Key Registration

Enter your product key to unlock Calibration Control

By default, the calibration management software you install will be in demo mode until you enter a product key unlocking the software.  The first time you start Calibration Control, you will see the Ape Software Registration Wizard below. Don't worry; if you don't have a product key yet, you can still use the program.

Note: If you already started the program and want to enter a product key to unlock Calibration Control, click the Unlock this Program from the Utilities menu to start the Registration Wizard.

Click the [Next] key to continue.

Basic information relating to system requirements and hardware requirement is listed on the readme page.  This is good to know if later you find that the software isn't quite working the way it should.  You may lack either a minimum system or hardware requirement.

Press the [Next] button to continue.

On the User Information page, you can skip the 'CD-Keys' (aka product key) fields and the program will operate in demo mode.  Demo mode will give you full features but only last for 30 days.

Press the [Next] button to continue and you're done!

After using the registration wizard for the first time (above), if you did not enter a product key, you see the following dialog each time you open the software.

After the 30 days of demo elapse, you will see a slightly different message when you start up and you will not be able to open individual equipment records without entering a product key.

Last updated: 6/13/2011

Compatibility: Calibration Control versions 5.x