| site home | document home |

Purpose Section

The purpose of this procedure is to provide general instructions for the calibration of electronic torque wrenches.

Another Sample Section (Procedure)

The Electronic Torque Wrench is a precision hand tool designed to permit accurate manual tightening of threaded fasteners. The tool is designed around a conventional ratchet wrench with a self-contained microprocessor built into the wrench handle. The control housing contains the operating controls, indicator lights, audible alarm, digital display and the control electronics. A protective end cap at the end of wrench handle provides access to a 12-pin receptacle for connecting a battery charger, XY platter, interface, or test connector. The wrench has the capability of displaying the desired angle of tightening and using the bolt and joint mechanical properties for optimum tightening force. However, this procedure will be limited to straight torque calibration.

Screen Shot